I cannot believe that it is already the middle of July and it will not be long before the kids are heading back to school! We hope you have enjoyed your summer so far.

Just launched last month by Siser was the new holographic Rainbow Heat Transfer Vinyl. It is a blast of color and glitter, so needless to say it has been a favorite here at MiKri World.
It looks great on any color, even black!
Holographic Applies to: 100% cotton, Poly/cotton blends, 100% polyester and Leather
Laundering:Wait 24 hours before 1st wash
Machine wash warm or cold / mild detergent
Dry on normal dryer setting
Do not dry clean
Here are the recommended settings for your cutters per Siser (remember for most cutters you will need to mirror your image):
Cricut:
Blade: Standard
Setting: Light Cardstock
Silhouette Cameo:Blade: Standard, 3
Setting: Heat Transfer,
Smooth
Speed: 8
Force: 14
Scan N Cut:Blade: Standard, 2
Cut Speed: 1
Cut Pressure: 3
Roland GS/GX-24:
Blade: 45°
Gram Force: 180-190
Offset: .250
Speed: 30 cm/s
Graphtec:Blade: 45°
Gram Force: 17-18
Tool: CB09U+0
Speed: 30 cm/s
Application instructions (home iron)
• Set iron dial between Cotton and Linen
• Cover design with Kraft paper or non-stick cover sheet
• Place on flat, hard surface (ironing board not recommended)
• Press iron with medium/firm pressure (do not slide iron)
• Press each section of design for 10-15 seconds
• If areas of design lift after application, replace cover sheet
and re-press for 5-10 seconds
• Peel carrier cold
Application Instructions (heat press)
• Cut in reverse
• Weed excess material
• Preheat garment for 2-3 seconds
• Apply design at 320°F/160°C
• Use medium pressure for 15-20 seconds
• Peel carrier cold